ATEM 2 M/E Production 4K - Custom Multiview

3 posts / 0 new
Last post
Offline

Location

San Francisco,
United States
Joined: 25/11/2015
Posts: 4
ATEM 2 M/E Production 4K - Custom Multiview

For most of our productions we have 2 camera inputs and a computer input. We're not doing any graphics, and only doing straight cuts. I would love the ability to have a 2x2 grid showing each of these inputs + a program feed, using the Multiview out on our ATEM. I have little need to show 8 inputs, pvw, and pgm.

I'm wondering if it's possible to reconfigure something in the ATEM software to achieve this. Is there a hardware/technical reason it's not possible? Seems if you can show 10 feeds at once, 4 should be no problem...

Offline

Location

lahore,
Pakistan
Joined: 11/03/2015
Posts: 2
Create stunning multi camera

Create stunning multi camera live production with the world’s most advanced production switchers! ATEM switches between SD, HD or Ultra HD video standards so you can form exciting live production with a wide range of video sources such as cameras, disk recorders and slide shows or animation from computers. 
You get powerful features such as chroma key, creative transitions, media pool, downstream keyers, audio mixer, multi view and more! The more advanced models include features such as up to 20 SDI inputs, SuperSource multi-layer engine, full motion DVE, stinger transitions, larger media pool with full motion clips and up to an incredible 6 auxiliary outputs.
70-412 Dumps

Offline

Location

Burbank,
United States
Joined: 28/10/2014
Posts: 23
I think the short answer is,

I think the short answer is, no.

 

You could use something like this instead for a quad split.

 

http://www.mcmelectronics.com/product/33-11950